MINGKAI TECHNOLOGY
News Center
07
2023
-
06
How the fixture is maintained
Author：
In a broad sense, the device used to quickly and easily install the workpiece in any process can be called a fixture. So how is the fixture maintained? Let's take a look together.
(1) Check whether the limit size is still in the correct position before use;
(2) If the stop pin is worn out of tolerance, it can be polished and repaired; If the baffle, latch and positioning cone pin are worn out of tolerance, they can be reassembled and continue to be used after staggering the worn parts;
(3) After use, it needs to be coated with anti-rust oil.
The above is some relevant introduction to the fixture, if you want to know more, you can pay attention to the website to view.
Latest News
2023-06-07
What are machining parts? What are the types of machining technologies?
"Machining parts are short for machining, which refers to the processing process of removing materials through mechanical precision machining. Finishing, that is, precision machining, refers to high-precision machining.
2023-06-07
Surface treatment method after die-casting aluminum processing
After the die-cast aluminum parts are processed, different surface treatment methods can be taken to improve the appearance, corrosion resistance and wear resistance. Here are a few common die-cast aluminum surface treatment methods:
2023-06-07
Do you know how machine tool fixtures are classified in machining?
In mechanical production, jigs, tools, measuring tools and auxiliary tools as tools continue to innovate with the development of science and technology, and their functions are constantly expanding. Machine tool fixtures have a direct impact on the quality, productivity and product cost of part processing. Therefore, fixtures are one of the important process equipment in both traditional and modern manufacturing.
2023-06-07
What are the types of fixtures?
General fixtures refer to fixtures that have been standardized and can be used to process different workpieces within a certain range. For example, three-jaw chucks and four-jaw chucks on lathes, and chicken heart chucks.
2023-06-07
What are the functions of the fixture
It can stably ensure the processing accuracy of the workpiece: when the workpiece is clamped with the fixture, the position accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture. It is not affected by the technical level of workers, so that the processing accuracy of a batch of workpieces tends to be consistent.